Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?