Hi,
Does anyone know whether the MoveSecurityAttributes registry setting should work in Server 2012? In 2008 you could enable this to make moved files/folders inherit permissions from their parent. But I can't get it working in 2012.
2008 needed a a hotfix (kb/2617058) to get it working, though - reckon I can install this on 2012?
(can't add links till I'm verified, sorry)
Cheers,
Andrew
A picture paints a thousand words, so I painted. Far easier than tying myself up in knots of words.
Many thanks.
Good afternoon
Just having a bit of an odd issue when searching for a file on a Windows 2012 R2 terminal server; when searching for an excel file in file explorer or the start menu search, it does not show up despite being in the searched location. The drive on which the file is located is indexed, and we have tried rebuilding the index several times.
The file can be found if you create a copy of it though, can anyone shed some light as to which the original is not showing up?
Hi There,
Massive shot in the dark here but I am struggling with a pretty major issue atm. We have a production file server that is hosted on the following:
Dell MD 3220i -> iSCSI -> Server 2008 R2 Hyper-v Cluster -> Passthrough Disk -> Server 2012 R2 File Server VM
Essentially 3 times now, roughly a month or so apart. The file server stops accepting connections. During this time, the server is perfectly accessible through rdp or with a simple ping. I can browse the files on the server directly but no-one appears to be able to access the shares over SMB. A reboot of the server fixes the issue.
As per a KB article I removed nod antivirus from the server to rule out a conflicting filter mode driver after the second fault. Sadly yesterday it happened again.
The only relevant errors in the servers log files are:
SMB Server Event ID 551
SMB Session Authentication Failure Client Name: \\192.168.105.79 Client Address: 192.168.105.79:50774 User Name: HHS\H6-08$ Session ID: 0xFFFFFFFFFFFFFFFF Status: Insufficient server resources exist to complete the request. (0xC0000205) Guidance: You should expect this error when attempting to connect to shares using incorrect credentials. This error does not always indicate a problem with authorization, but mainly authentication. It is more common with non-Windows clients. This error can occur when using incorrect usernames and passwords with NTLM, mismatched LmCompatibility settings between client and server, duplicate Kerberos service principal names, incorrect Kerberos ticket-granting service tickets, or Guest accounts without Guest access enabled
and
SMB Server event ID 1020 File system operation has taken longer than expected. Client Name: \\192.168.105.97 Client Address: 192.168.105.97:49571 User Name: HHS\12J.Champion Session ID: 0x2C07B40004A5 Share Name: \\*\Subjects File Name: Command: 5 Duration (in milliseconds): 176784 Warning Threshold (in milliseconds): 120000 Guidance: The underlying file system has taken too long to respond to an operation. This typically indicates a problem with the storage and not SMB.
I have checked the underlying disk/iscsi/network hyper-v cluster for any other errors or issues, but as far as I can tell everything is fine.
Is it possible that something else is left over from the NOD antivirus installation?
Looking for suggestions on how to troubleshoot this further.
Thanks
Hello.
At my private test setup, i have an single disk used for backup (not important) and some VHDXs for some VMs.
I just bought 2 more 4TB HGST disks, and now want to use the previous single disk + the 2 new ones as a Raid 5 (parity) volume.
The only problem is, that one of the VHDX files on the single HDD is 2,9TB in size, and i dont have any other storage where i can put the 2,9TB of files - while creating a new storage pool.
Is it possible to create a storage pool with 3 disks in it, and "merge" the data from the Single HDD to the new parity volume?
Datatechnician
I found a few articles regarding this but most offer homebrew scripts (not necessarily anything wrong with that) and are a couple/few years old.
We are implementing some new file servers in our environment and moving from Backup Exec to DFSR. Basically just replicating the files from the file servers to a server @ home base which gets backed up nightly.
I'm looking for a tool that will monitor the replication groups and alert (email) us if there are any errors. Does such a tool exist?
If not, is there a good script that will do the job?
Any recommendations/advice/information would be appreciated. Thanks!
Hello,
Issue:
On a Virtual Machine with a secondary VHDX attached, I cannot manage (bring online, initialize, partition, format, or write to) the VHDX hard drive once it has "Enable Virtual Hard Disk Sharing (VHD Sharing)" enabled.
Questions:
Should I be able to manage (bring online, initialize, partition, format, and write to) a VHDX hard drive once it has VHD Sharing enabled? If I should be able to manage it, what am I missing?
Topography:
One SuperMicro Cluster In a Box (CIB) with 2012 R2 Data Center on each node. Microsoft Failover Cluster installed and working on each node. The Failover Cluster Servers on each host passes all cluster validation tests. Two Hyper-V 2012 R2 Data Center Virtual Machine (VM) servers, one on each node. 1 common Cluster Shared Volume (CSV) and 1 Generation 2 Scale-Out File Server (SOFS) shared volume both Resilient File System (REFS) formatted. One 5 Gigabit (Gb) Virtual Hard Drive Type X (VHDX) file on the CSV and/or SOFS. Integrity bit and read only turned off on VHDX file.
Each of the two Hyper-V VMs have one 127Gb VHDX Generation 2 primary hard drive and 1 VHDX secondary hard drive attached, both on SCSI Controller #1.
Background:
If I start VM1 without the VHD Sharing enabled on the secondary hard drive, I can bring the drive online, initialize, partition, format, and write to the drive.
If I enable VHD Sharing, I can no longer modify the drive in Disk Management in any way. With or without VM2 running.
Both VMs and the CSV and SOFS are on the same host cluster server, or not, no difference…
The VHDX is referenced either by the CSV name C:\ClusterStorage\Volume1\TEST1.VHDX or a Shared Folder name \\sharedfolder\folder\Test1.VHDX .
If I start VM1 with VHD Sharing disabled and I format the drive, then shut down and enable VHD Sharing, the drive is offline and requests initialization which fails with an "I/O device error", every other attempt to manage the drive fails with the same "I/O device error", error.
Events:
VDS fails to write boot code on a disk during clean operation. Error code: 8007045D@02070008
Log Name: System
Source: Virtual Disk Service
Date: 3/3/2015 11:39:18 AM
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.Domain.local
Description:
VDS fails to write boot code on a disk during clean operation. Error code: 8007045D@02070008
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Virtual Disk Service" />
<EventID Qualifiers="49664">10</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T19:39:18.000000000Z" />
<EventRecordID>27318</EventRecordID>
<Channel>System</Channel>
<Computer> Server1.Domain.local </Computer>
<Security />
</System>
<EventData>
<Data>8007045D@02070008</Data>
</EventData>
</Event>
AND
Log Name: System
Source: disk
Date: 3/3/2015 12:16:42 PM
Event ID: 153
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: Server1.Domain.local
Description:
The IO operation at logical block address 0x0 for Disk 1 (PDO name: \Device\MPIODisk1) was retried.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="disk" />
<EventID Qualifiers="32772">153</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T20:16:42.017090000Z" />
<EventRecordID>27333</EventRecordID>
<Channel>System</Channel>
<Computer>Server1.Domain.local</Computer>
<Security />
</System>
<EventData>
<Data>\Device\Harddisk1\DR1</Data>
<Data>0x0</Data>
<Data>1</Data>
<Data>\Device\MPIODisk1</Data>
<Binary>0F01040004002C00000000009900048000000000000000000000000000000000000000000000000000020488</Binary>
</EventData>
</Event>
Thanks again for any help,
Robert
Hi
We have a strange issue from today where , we are not able to connect to our 2008 R2 server through remote desktop. Then I tried to map to a network folder, I got the following message
" the mapped network drive could not be created, insufficient system resources exist to complete the requested service"
I tried to install all the updates, still no improvement.
Can some one suggest me a solution for this
Can't install IIS 6 on a Windows 2003 Server without the .cab file. Please give me a link to download it.
Thanks,
Randy.
Hi All
I have strange situation - i have 2 servers running Win2012R2 with 2 folders replicated by DFSR ( + Deduplication Enabled on both servers). Second Server folders set to ReadOnly. But second server showing high backlog waiting replication to Server1 - in the same time Staging Folder is empty. When i'm disabling membership for this server, and enabling back - some time it is showing 0 backlog - all is ok, but then it resumes to show hight backlog again. How i can fix it?
Best Wishes, Andrew Golubenkoff
Hi all,
I recently set up a windows 2012 file share server for departments and user folders. I've pushed the drive mappings out via group policy and on my laptop they work flawlessly. On everyone else's computers, they're hit or miss. Group Policy is currently mapping the drives based on IP address (i.e. \\172.31.255.250\shares\departments). As an example, this share will map to a user's device and it will be accessible. Periodically, they will no longer be able to access it and receive a "Location is not available" message. However, if I navigate to the DNS name (i.e. \\servername\shares\departments) it will work. If that location becomes unavailable later on, I can still access it via FQDN (i.e. \\servermame.domain.com\shares\departments).
More information:
- Using my account on my laptop, I never have an issue with my network drives.
- Signing in to another laptop with my account, I experience the same issues as the other users.
- All of our computers are running windows 8.1 pro and are currently up to date.
GPO configuration:
Action - Update
Location - \\172.31.255.250\shares\departments
Reconnect - True
Drive Letter - Use S:
Hide/Show this drive - Show this drive
Hide/Show all drives - No change
Edit:
I'm seeing this in the logs and don't know why it would be happening:
The user 'S:' preference item in the 'Map department folders {3B0FD149-D2DD-440B-A68D-8A137558F393}' Group Policy Object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed.
I'm running Windows Server 2012 R2 with an LSI SAS 9200-8e Host Bus Adapter. This adapter is certified for Server 2012 R2.
I have a Dell MD1000 storage array connected and loaded up with SEAGATE ST3300555SS drives. I have successfully configured a storage pool. However I need to be able to toggle a drive light so I can pull out the correct drive.
When I choose the "Toggle Drive Light" option I get the error message. Failed to toggle the drive light: Not Supported.
Is there anything I can do to get this working?
How can I figure out which device is the problem? The HBA (LSI SAS9200-8e), the storage enclosure (Dell MD1000) or the drive (SEAGATE ST3300555SS)?
Hi All,
We are Facing an issue with an Virtual application which has .net code running with app pool configured to an service account. The application is getting accessed for the service account but when other users access the application through the network credentials the UI of the application is not getting accessed fully we came to know that styles and scripts folder where the js files and aspx files of the application is getting access denied for normal users but when access the same app through app pool account we are able to access the app. Kindly provide some suggestion for resolving this issue.
Thanks
Srinivasan
Srini "Life is a Game"
Hello,
We have a NFS share on Windows Server 2008 R2 setup the following way,
NTFS permissions for ANONYMOUS LOGON and Everyone groups are set to Full control.
When mounting this share on our Solaris workstation, it mounts and we can view files in that mount but cannot edit or write to it.
mount -f nfs 10.0.0.2:/Folder/ /test
permissions are set as:
drwxrwxrwx 2 nobody nobody 4096 Mar 4 08:57 test/
when in test direcorie, trying to copy a file gives this error:
cp gp.txt gp_1.txt cp: cannot create gp_1.txt: Permission denied
Please help,
Thanks
Hello I am trying to create clustered storage spaces with 2 nodes(R710\Windows 2012 R2) and JBOD(SC280 + MD1200). I created windows cluster and add both servers as cluster nodes. I see both servers can see the disks and also installed MPIO feature. I have all SAS drives 3.5 TB and 1 TB.
1 -Should I create separate Clustered Storage Pool for 1 TB and 3.5 TB drive or just one storage pool with both density drive. I didn't find or missed any good best practice document.
2- Should I assign hot spare in storage Pool I believe in windows 2012 R2 Microsoft recommend allocation to be automatic and not to assign hot spare
3- Do I need to install cluster role inorder to have other servers to use this storage as ISCSI, NFS and SMB ?
Really appreciate everyone help
ad
I have file share create on windows 2012 R2 and enable encryption on the share (SMB 3). I cant connect to share from windows 7 machine when encryption is enabled on file share. Without encryption works with fine. I works fine with windows 8 with encryption enabled. I believe windows 7 support SMB 3
Can you enabled SMB 3 on windows 7 machines ?
I need to encrypt windows file share because of sensitive data not sure what other options I have EFS or Bitlocker ?
ad
Hi to everyone.
I had a problem for quite some time time and even i tried to solved it till now unfortunately seems unreachable.
I have a 2008 R2 server which is used as SQL 2005 server. My application program shared from the server. My win 7 client use a map network drive to access my share folder from my windows server. Suddenly my clients lost my connection. Since then i cannot connect to the folder and i got the message
Windows cannot access
\\Server\StorageCheck the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
Details: Error code: 0x80070035 The network path was not found.
I check out my share permissions, all seems ok. I also check out firewall, services, TCP/IP, share folders, really almost everything but still nothing.
Does anyone have any idea how to resolve the problem.